Friday, July 18, 2014

Arc - welding safety tips- Becouse safety first.

A welder should wear inflammable clothes and protective gear to shield their entire body, like the following:
1. Aprons that are made from leather that is flame-resistant
2. Safety steel-toed boots, preferably high-top ones because low-cut boots and shoes puts you at a higher risk of catching slag that is hot.
3. Helmets or any other head gear to protect you from sharp and falling objects.
4. Goggles or helmets to protect your eyes from the transmission of radiant energy being emitted by the welding tool.
5. Optional earplugs or earmuffs if you are working with anything noisy or in environments that have a high level of noise; and
6. Gas masks to prevent inhalation of hazardous fumes, dust and gases because if you breathe in too much of those, they can definitely damage your lungs and give you a hard time breathing.
Did you know that if you wear dark clothes, you can be more protected from the reflection under your face shield? This is because the dark color reduces the reflection. Clothing made of wool is also preferred over clothing made of cotton because wool can resist deterioration better than cotton. Also, your pants should not have pockets on the front and should not have cuffs so that you would not catch sparks.
In addition to arc welding safety, Tips for employers:
1. The cutting machine and arc welding frames should be grounded. Inspections should be done on connections to ensure stability.
2. Any kind of operation involving arc welding should be shielded by inflammable and non-combustible screens.
3. Fire can strike anytime, so be sure to have proper fire-extinguishing equipment ready and located in easily-accessible areas for welders. Make sure that your workers know how to work the fire extinguisher.
4. Make sure there are no flammable gases or liquids near the welding areas; and
5. Make sure that the welder is working in an area that has sufficient ventilation.

No comments:

Post a Comment